LA GARD 700 Series Programming
Programming instructions for dormakaba LA GARD 700 Series electronic safe locks.
⚠️ Important Safety Notes
- Test new codes with door OPEN before closing
- Write down codes and store outside the safe
- Change default codes immediately
- 4 wrong entries = 5-minute lockout
- Replace 9V batteries annually
Official Documentation
Which Keypad Do You Have?
| Model | Display | Users |
|---|---|---|
| 700 Basic | ❌ No | 2 |
| 702 | ❌ No | 30 |
| 702D | ✅ OLED | 30 |
| 703-705 | ✅ OLED | 30-100 |
700 Basic No Display
6-digit codes, button sequences
Default Codes
Manager
123456
6 digits
Super Master
55555555
8 digits
User
Not Set
Add via Mgr
Open the Lock
- Enter 6-digit code
- Turn handle within 4 seconds
Change Manager Code
- Enter
000000(six zeros) - Enter current code (default:
123456) - Enter new 6-digit code
- Re-enter new code to confirm
- Test with door open!
Add a User
- Enter Manager code, hold last digit 3 sec
- Press
1 - Enter new User's 6-digit code
- Re-enter to confirm
User Commands
Manager enters code, holds last digit 3 sec, then:
| Press | Action |
|---|---|
1 | Add/Reinstate User |
2 | Disable User |
3 | Delete User |
702 Non-Display # Commands
Multi-user, # command sequences
Default Codes
Master (00)
00-12345678
ID + 8 digits
Manager (01)
01-123456
ID + 6 digits
Users
ID 02-29
Not set
Open the Lock
- Press any key to wake
- Enter ID + combo (e.g.,
01123456) - Press Return (↵)
- Turn handle within 3 sec
# Commands
| Cmd | Function |
|---|---|
#50 | Add User |
#52 | Change Combo |
#54 | Enable/Disable |
#56 | Delete User |
#72 | Time Delay |
#25 | Factory Reset |
Change Combo (#52)
Command:
#52 + ID + OldCombo + ID + NewCombo + ID + NewCombo + ↵
Add User (#50)
Command:
#50 + YourID + YourCombo + NewID + NewCombo + 2 + 3 + ↵
2=Standard User | 3=Open+Audit
702D, 703, 704, 705 OLED Display
Menu navigation with display
Default Codes
Master (00)
00-12345678
ID + 8 digits
Manager (01)
01-123456
ID + 6 digits
Users
ID 02+
Not set
Display Buttons
Open the Lock
- Press any key to wake
- Enter 2-digit ID (e.g.,
01) - Enter 6-digit combo
- Turn handle within 3 sec
Menu Paths
Change Combo:
Add User:
Delete User:
Time Delay:
LED & Audio Signals
🟢
Green + beepButton OK
🔴
Red + beepInvalid
🟢🟢🟢
3 greenSuccess
🔴🔴🔴
3 redInvalid code
🔴⏱️
Red/10sLockout
🔋
5 beepsLow battery
Troubleshooting
- No response: Replace 9V batteries
- Wrong code: Wait 30 sec. 4 wrong = 5 min lockout
- Forgot combo: Call Key-En-Lock for safe opening
- Press # to cancel and start over